1) RAISING MACHINE MANUFACTURER: MARIO CROSTA. MODE: 1998-MC 20/24 YEAR OF PRODUCTION: 1998 ELECTRICAL POWER: 69.20 KW (68 kW) V MAX: 440 V – 100 A – 400 VOLT WIDTH: 240 cm FEATURE: 2 DRUM X 24 Cylinder. USE AREA: Used for fabric fluffing and especially for fluffing thin fabrics. MATERIALS USED BY THE MACHINE: Mostly cotton and polyester fabrics that need to be fluffed on the surface. It is also used for fluffing polar fabrics. 2) ROLL WINDING MACHINE: MANUFACTURER: DEMSAN MACHINE. MODEL: Top Wrapping roll wrapping at the same time on the bottom and top. WORKING WIDTH: 250 cm. 3 or 4 knives can be attached. Knives are Pneumatic (Air) disk knives. With automatic metering stop. Tension adjustment can be made. 3) ROLL JOINING (WELDING) MACHINE: It is possible to easily and cleanly join polyester fabrics with heat without the need for a sewing machine. It does not cause sagging as in sewing machines. It allows the spliced rolls to be removed in first quality roll quality. PRODUCTION LINES FOR SALE 1) PASTE POINT AND SCATTER COATING FACILITY: 1a) PASTE POINT COATING LINE: MANUFACTURER: CARATSCH AG. MODEL: SANTACOATING PASTENPUNKT / STREUER 220 PRODUCTION YEAR: 1996 WORKING WIDTH: 200 cm. WORKING SPEED: Provides efficient operation between min.6 mt/min and maximum 40 mt/min. Raw material feeding is provided to the templates with monopomp paste pump. 1b) SCATTER COATING LINE It is integrated with the paste dotting facility. It can also be operated together when a double dot unit is installed. MANUFACTURER: CARATSCH AG. MODEL: VILLARS TYPE 81 PRODUCTION YEAR: 1996 WORKING WIDTH: 220 cm. WORKING SPEED: 40 mt/min. COATING WEIGHT: From 5 gr/m2 to 50 gr/m2. 1c) OVEN SECTION MANUFACTURER: CARATSCH AG. PRODUCTION YEAR: 1996 WORKING WIDTH: 230 cm. WORKING SPEED: Provides efficient operation between min. 6 mt/min and max. 40 mt/min. Heating is provided by resistance and infrared during SCATTER. Air conditioners are off in the oven. Oven chambers are open during PASTE dot operation. Drying process is provided in this way 1d) CALENDER Cold water circulation together with cooler applies cold calender process with cylinders cooled by the existing water. Especially during SCATTTER Coating, it ensures that powders that have been sprinkled and melted in the oven by means of resistances are crushed and a flat film image is obtained. This cylinder is not used during PASTE dot coating. Cooler capacity 30,000 kcal/h. Brand: Tool-Temp. 1e) HEATER Type: HT-560 kw-B HEATING POWER: 560 KW Gökçe Natural gas burner. Double Stage. Closed circuit hot oil boiler and circulation. 2) POWDER POINT INTERLINING AND COATING LINE: MANUFACTURER: CARATSCH AG. MODEL: GRAVURE CYLINDER PRINTED DOTS COATING PRODUCTION YEAR: 1990 WORKING WIDTH: 210 cm. OVEN: 300 cm long. With infrared resistance. HEATER: 250 KW Natural gas burner, with closed circuit hot oil circulation. COOLER: FRIGOMECCANICA brand closed circuit water cooling system. Model: HK. Type:40 CALENDER: Water cooled. WINDING: Hydraulic-Automatic. WORKING SPEED: Provides efficient operation between min.10 mt/min and max.30 mt/min. RAW MATERIALS USED IN THE MACHINE: PA, PES, PUR, LDPE, HDPE, EVA Powders between 0-120 Micron and 0-200 Micron. 3) POWDER POINT INTERLINING AND COATING LINE: MANUFACTURER: SALADIN AG. MODEL: GRAVURE CYLINDER PRINTED DOTS COATING PRODUCTION YEAR: 1981 WORKING WIDTH: 190 cm. OVEN: 100 cm long, 200 cm wide. Infrared resistance. HEATER: Closed circuit hot oil system heated with natural gas. HEIZAMAT Hot oil boiler. Model: 1981-4041. Type: M 120 BV U 380 V, 26 A. 120,000 kcal/h = 140 Kw. Maximum heat: 300 C COOLER: Saladin. 1,000 Kcal/h CALENDER: Water cooled. WINDING: Hydraulic-Automatic. WORKING SPEED: Provides efficient operation between min. 4 mt/min and max. 20 mt/min. RAW MATERIALS USED IN THE MACHINE: PA, PES, PUR, LDPE, HDPE, EVA Powders between 0-120 Micron and 0-200 Micron. 4) TERMOBOND NONWOVEN LINE: MODEL YEAR: 1995 4a) FEEDING UNIT 3 Way Bale Opener, Electronic weighing and dosing. Blowing and threshing section TRÜTZSCHLER brand. 6 Chamber first filling from the Bale opening paths of original fibers. 2 Chamber for fibers coming from the edge suction during the carding process (Recycle). 8 Chamber Multimixer. TFN fine opener at the exit. Shute feed system behind the card, width adjustable between 200 cm-230 cm. FBK feeding with gram adjustment. 4b) CARDING MACHINE TYPE: Double doffer, 3 Random Carding machine. BRAND: SPINNBAU BREMEN. MODEL YEAR: 1995 WIDTH: 230 cm SPEED: Ability to work between 10 m/min - 100 m/min in different fiber types, depending on grammage and width. WORKABLE GRAMMS: Between 18 gr/m2 and 60 gr/m2. MATERIALS THAT CAN BE PROCESSED IN THE MACHINE: PES, PA, PP fibers. Between 1.2 Denier and 2.5 Denier. FINAL PRODUCTS: Nonwoven for adhesive interlining, absorbent Nonwoven layer used in diapers. 4c) CALENDER TYPE: 2 hot cylinder Calender. BRAND: RAMISCH KLEINEWEFERS MODEL YEAR: 1995 WIDTH: 230 cm FEATURE: One is the upper cylinder with engraving and the lower cylinder is flat. It works with a hydraulic pressure system (water cooling). There is also a spare gravure cylinder. Installed engraved cylinder has 16% open area. Spare engraved cylinder has 11% open area. There are also cold cylinders at the exit. 4d) WINDING TYPE: Automatic winding, metering and automatically emptying and starting a new winding when full. BRAND: SPINNBAU BREMEN MODEL YEAR: 1995 WIDTH: 230 cm FEATURE: Pneumatic shaft (suitable for 76 mm roller) Cutting knife system for width adjustment in front (Floppy and pneumatic) Automatic cutting when desired length is reached. Automatic roll change system. Winding can be done up to 6,000 meters for thin products and up to 2,000 meters for thick products. 4e) OIL HEATING SECTION TYPE1: Natural gas heating system BRAND: BT Boiler (Turkish made) FEATURE: Natural gas burner, heating up to maximum 280 C is possible. It works with hot oil system. TYPE2: Heated with electric resistance BRAND: AURA (German made) FEATURE: Only electric heating is optional. Not used unless necessary. The hot oil coming from the BT Boiler with burner is transferred to the calender from this section. It is completely closed circuit. 5) NEEDLEPUNCH (NEEDLEPUNCH) NONWOVEN FACILITY: 5a) BALE OPENER-THREWING ROOM AND FEEDING SECTION TYPE: 3-Way Bale opener, blending and chambering. Electronic weighing and dosing. BEMABLOW Unit. BRAND: BEMATIC. MODEL YEAR: 2015 5b) CARDING SECTION TYPE: Double doffer-Double Random. BRAND: BEMATIC. MODEL YEAR: 2015 WIDTH: 300 cm FEATURE: BEMAFEED Shute feed Card feeding system. 5c) CROSSLAPPER SECTION TYPE: Carbon cylinder belt spreader. BRAND: YING YANG. MODEL YEAR: 2020 LAYING WIDTH: 520 cm FEATURE: Electronic conveyor belt control system (Push Rod). Carbon Cylinder, Carbon conveyor belt. 5d) DRAFTER SECTION BRAND: YING YANG. MODEL YEAR: 2020 8 double cylinders, can be controlled from the central PLC. It is a system that can work synchronously with the speed of the line. 5e) BATT FEEDER SECTION BRAND: YING YANG. MODEL YEAR: 2020 5f) NEEDLEPUNCH SECTION BRAND: YING YANG. MODEL YEAR: 2020 1. NEEDLE Top-punched (Pre-needle) Width: 4,800 mm 2. NEEDLE Bottom-punched. Width: 4,600 mm 3. NEEDLE PUNCH Top impact. Width: 4,600 mm It has a system where all shafts are lubricated with hydraulic oil and the oils are kept at a stable temperature in the heat control system after circulation. The final product width varies according to the weight and fiber type, but the average is 420 cm. 5g) CALENDERING SECTION BRAND: YING YANG. MODEL YEAR: 2020 WORKING WIDTH: 500 cm FEATURE: It has a closed circuit oil heating system with electric resistance. Flat Calender. 5h) ACCUMULATOR SECTION BRAND: YING YANG. MODEL YEAR: 2020 WIDTH: 500 cm. FEATURE: It is operated in accordance with the machine working speed. 25m fabric accumulation (depending on the weight, but average) can be done. The height of the machine is 5m. There is an electronic tension control system. 5i) WINDING SECTION BRAND: YING YANG. MODEL YEAR: 2020 WORKING WIDTH: 450 cm. FEATURE: The machine is operated in accordance with the working speed. There are 6 cutting blades on it. There are 3 Pneumatic Shafts that can be wrapped on a 76 mm diameter reel. It cuts automatically when the meter is full.